35KV Aluminum Wire Armor Power Cable
CableSelection
It is essential that the type of cable ordered issuitable for its intended use. Cable choice will be based on a whole range offactors including installation specifications, relevant local regulations andthe performance of appropriate cable types. It is therefore impossible toprovide a conclusive guide to cable selection and we would advise you to contactus for our specialist advice on suitable designs to meet you specific cableneeds.
Conductors
Conductors shallbe of Copper or Aluminium, circular standed(Non-compacted or Compacted) orShaped, Class 2 to IEC 60228, BS EN 60228. For smaller sizes, a solid circularconductor, Class 1 as per IEC 60228, BS EN 60228 can also be supplied uponrequest.
Insulation
- XLPE material and thickness shall be as per IEC 60502 or BS 5467 rated for90°C continuous operation.
- PVC material and thickness shall be as per IEC 60502 or BS 6346. PVCinsulation Material-Type A as per IEC 60502 or TI1 as per BS EN 50363.
- PVC insulation as per SASO 1694 rated for 85°C continuous operation is alsoavailable on request.
Assembly
Two, Three or Four insulated conductors arelaid-up together with non-hygroscopic fillers compatible with the insulationmaterial and the assembly is bedded with an extruded layer of PVC. In case ofnon-armoured cables, this layer may be omitted if the outer shape of the cableremains practically circular.
Armour
Galvanized SteelWires applied helically over the bedding as per IEC 60502 or as per BS 5467, BS6346. (Single core cables shall be Aluminium wire armoured) Double Steel Tapesapplied helically over the bedding of multi-core cables as per IEC 60502.
Outer Sheath
Outer sheathwill be extruded PVC type ST2 as per IEC 60502-1, Type 9 as per BS 7655. Specialtype of PVC sheathing material such as fire retardant PVC, anti-termite andanti-rodent PVC, ultraviolet PVC, Oil resistant PVC, etc. are available onrequest also other special sheathing materials such as LLDPE, MDPE, HDPE, LSF,CPE etc are available.
Size:
Number of cores | × | core cross section [mm2] | Approx. outer ø min.[mm] | Approx. outer ø max.[mm] | Cooper weight [kg/km] | Approx. cable weight [kg/km] |
1 | × | 50 | rm/16 | 33 | 38 | 662 | 1350 |
1 | × | 70 | rm/16 | 35 | 40 | 854 | 1600 |
1 | × | 95 | rm/16 | 36 | 41 | 1094 | 1900 |
1 | × | 120 | rm/16 | 38 | 43 | 1334 | 2150 |
1 | × | 150 | rm/25 | 39 | 44 | 1723 | 2550 |
1 | × | 185 | rm/25 | 41 | 46 | 2059 | 2900 |
1 | × | 240 | rm/25 | 43 | 48 | 2587 | 3500 |
1 | × | 300 | rm/25 | 46 | 51 | 3163 | 4150 |
1 | × | 400 | rm/35 | 49 | 54 | 4234 | 5100 |
1 | × | 500 | rm/35 | 52 | 57 | 5194 | 6200 |
power cable awa: