UD cable 35KV underground distribution cable

Description
Single conductor cable with filled strand aluminum conductors, triple extruded dry cured insulation system consisting of a thermosetting semiconducting conductor shield, high dielectric strength TRXLPE insulation, thermosetting semiconducting insulation shield, copper concentric neutral wires, water blocking tape, blacklow-density polyethylene (LLDPE) jacket.

Technical Parameter for the UD cable 35KV underground distribution cable:
Conductor: Compressed concentric stranded aluminum alloy 1350
Conductor Shield: Extruded thermosetting semiconducting shield which is free stripping from the conductor and bonded to the insulation.
Insulation Shield : Extruded thermosetting semiconducting shield with controlled adhesion to the insulation providing the required balance between electrical integrity and ease of stripping.
Metallic Shield: Solid bare copper wires helically applied and uniformly spaced.
Water Block (F): Water-blocking agents applied over the insulation shield and around the neutral wires to resist longitudinal water penetration.
Jacket : Black insulating sunlight resistant linear low-density polyethylene encapsulating the neutral wires with three extruded red stripes and NESC lightning bolt symbol.

• ASTM B-231
• AEIC CS8
• ICEA S-94-649
• ICEA T-31-610
• ICEA T-34-664 as applicable for TRXLPE insulated concentric neutral cable

Applications
UD cable 35KV underground distribution cable is intended for use in wet or dry locations for distribution of single or three phase medium-voltage power. These cables may be installed in ducts or direct buried.  


For more info, please email us!